Shop headings: New Spares | Used Spares | Accessories | Brands
Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder
NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060
1 in stock
£29.50
INC VAT
£24.58 EX VAT
Rear dished drilled cast brake disc, black centre, 6 hole
Always fit new brake pads when replacing a brake disc - see BRA54724 . Also known as Guzzi ref. 14735750. Needs 6 brake disc bolts BRA98450. A quality part made in Italy
1 in stock
14635760 GU14635760 14 63 57 60
1463 5760 1463.5760 14.63.57.60
£210.00
INC VAT
£175.00 EX VAT
Black PS 12 master cylinder (original round type). Supplied without lever. Currently unavailble- see BRA28278 for an alternative master cylinder.
Also known as Guzzi ref. 28660178, uses seal kit BRA14701 and lever BRA14605 (or BRA17606). Replaces Guzzi refs. 17660250, 17660252, 14660200, 082054335. Can be used to upgrade cable operated front master cylinder on V35 I, V50 I and V50 II models. also suitable for 750S
1 in stock
17660253 GU17660253 17 66 02 53
1766 0253 1766.0253 17.66.02.53
Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei
£139.00
INC VAT
£115.83 EX VAT
Rear external master cylinder return spring, bright finish
1 in stock
19667600-z 19667600 GU19667600 19 66 76 00
1966 7600 1966.7600 19.66.76.00
£8.80
INC VAT
£7.33 EX VAT
Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers
For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers
1 in stock
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£31.50
INC VAT
£26.25 EX VAT
Complete drilled fully floating stainless steel EBC Brake Disc for front right hand side
Also known as Guzzi ref 28613660, 30635860. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to front of Nevada, Lario, T5, SP II, Monza 2, V75 and V35 3. Always fit new brake pads when replacing a brake disc. Use disc bolt BRA30460
1 in stock
28613670-z 28613670 GU28613670 28 61 36 70
2861 3670 2861.3670 28.61.36.70
£169.10
INC VAT
£140.92 EX VAT
Front brake master cylinder cap and rubber kit for Brembo PS 13 / PS16 master cylinder. Screw holes parallel to top and bottom edges
Brembo ref. 110430860
1 in stock
Also fits Ducati 907 i.e.
£18.90
INC VAT
£15.75 EX VAT
Rubber brakelight switch cover, 90 Degree
Also known as Guzzi ref. 10352710
1 in stock
12735100-z 12735100 GU12735100 12 73 51 00
1273 5100 1273.5100 12.73.51.00
£3.20
INC VAT
£2.67 EX VAT
Steel fixed rear brake pipe with threaded connectors at each end
Rigid brake pipe
1 in stock
17658650 GU17658650 17 65 86 50
1765 8650 1765.8650 17.65.86.50
£39.90
INC VAT
£33.25 EX VAT
Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder
Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'
1 in stock
£24.50
INC VAT
£20.42 EX VAT